24
MAINTENANCE
Regular Maintenance*
•
Wipe and clean RDL and Transmitter with a clean,
soft cloth and warm, soapy water after each use.
Take care not to use too much water when clean-
ing the Remote Receiver and Transmitter.
•
Dry off any moisture to prevent corrosion/rusting as
this may cause malfunction of the unit.
•
Regularly clean and oil the Ratcheting Cocking
Lever track and the Dummy Launcher firing shaft.
•
Follow Dummy Launcher maintenance directions in
the Dummy Launcher instruction manual.
During Use
•
Avoid placing the Launcher in extremely wet or
marshy conditions.
•
Never immerse Remote Receiver and Transmitter
in water or keep them out in rain.
•
If shooting dummy into water, dry the inside of the
dummy tube between launches.
Storing Your Launcher*
•
Keep Folding Legs in ‘closed’ position to keep the
springs from stretching.
•
Remove dummy and batteries from unit.
•
Do not stack anything on top RDL.
•
Do not store in extreme temperatures or humidity.
*WARNING - Make sure Launcher is not loaded with a
Power Load during maintenance and storage.
