manualshive.com logo in svg

D-Link xStack DGS-3420 Series, Reference Manual

Share
Download
D-Link xStack DGS-3420 Series Reference Manual Download Page 994

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 

989 

 

Restrictions 

Only Administrator and Operator-level users can issue this command. 

 

Example 

To upload firmware image to an RCP server: 

DGS-3420-28SC:admin#upload firmware_toRCP rcp: [email protected]/DGS-3420.had 
src_file 2.00.009.had 

Command: upload firmware_toRCP rcp: [email protected]/DGS-3420.had src_file 
2.00.009.had 

 

Connecting to server............... Done. 

Upload firmware.................... Done. 

 

DGS-3420-28SC:admin# 

 

29-8

 

upload log_toRCP 

Description 

This command is used to upload a log file from the device to a Remote Copy Protocol (RCP) server. 

 

Format 

upload log_toRCP [{username <username>} {<ipaddr>} dest_file <path_filename 64> | rcp: 
<string 128>] 

 

Parameters 

username 

-

 

(Optional) Specify the remote user name on the RCP server.

 

<username> 

-

 

Specify the remote user name on the RCP server.

 

<ipaddr> 

-

 

(Optional) Specify the IP address of the RCP server.

 

dest_file 

-

 

Specify the path name of the RCP server. 

Note:

 If a user specifies the relative file path, 

the path search strategy will depend on the server system. For some systems, the current user 
working directory will be searched first, followed by the environment paths.

 

<path_filename 64> 

-

 

Specify the path name of the RCP server.

 

rcp: 

-

 

Specify the path name on the RCP server.  

<string 128>

 - Specify the path name on the RCP server. Syntax: rcp: 

username@ipaddr/directory/filename. Example for full path: 
[email protected]/home/user_name/desxxxx.had. Example for relative path: 
[email protected]./desxxxx.had. 

Note:

 No spaces are allowed in the whole <string>. 

 

Restrictions 

Only Administrator and Operator-level users can issue this command. 

 

Example 

To upload the log from the device to an RCP server: 

Summary of Contents for xStack DGS-3420 Series






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands