manualshive.com logo in svg

D-Link xStack DGS-3420 Series, Reference Manual

The D-Link xStack DGS-3420 Series offers exceptional network performance and flexibility. Enhance your understanding of this advanced switch with the comprehensive Reference Manual, available for free download on our website. Explore its powerful features and unleash the true potential of your network with ease.

Share
Download
background image

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 

168 

 

ipaddress

 - (Optional) The IP address and netmask of the IP interface to be created. 

<network_address>

 - Specify the address and mask information using the traditional format 

(for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8). 

vlan

 - (Optional) The name of the VLAN corresponding to the IP interface. 

<vlan_name 32>

 - Specify the VLAN name. The maximum length is 32 characters. 

state

 - Enable or disable the IP interface. 

enable

 - Enable the IP interface. 

disable

 - Disable the IP interface. 

proxy_arp

 - (Optional) Enable or disable the proxy ARP. This is for the IPv4 function. The default 

is disabled. 

enable

 - Enable the proxy ARP. 

disable

 - Disable the proxy ARP. 

local

 - (Optional) This setting controls whether the system provides the proxy reply for the ARP 

packets destined for IP addresses located in the same interface as the received interface. 
When proxy ARP is enabled for an interface, the system will do the proxy reply for the ARP 
packets destined for IP addresses located on a different interface. For ARP packets destined 
for IP address located on the same interface, the system will check this setting to determine 
whether to reply. The default is disabled. 

enable

 - Enable the local proxy ARP function. 

disable

 - Disable the local proxy ARP function. 

bootp

 - Allows the selection of the BOOTP protocol for the assignment of an IP address to the 

switch’s System IP interface. 

dhcp

 - Allows the selection of the DHCP protocol for the assignment of an IP address to the 

switch’s System. 

ipv6

 - The following are IPv6-related parameters. 

ipv6address

 - The IPv6 address and subnet prefix of the IPV6 address to be created. 

prefix_name

 - Specifies the IPv6 prefix name used here. 

<string 1-12>

 - Enter the IPv6 prefix name used here. This name can be up to 12 

characters long. 

<ipv6networkaddr>

 - The IPv6 address and subnet prefix of the IPv6 address to be 

created. 

state

 - Enable or disable the IPv6 state of the IP interface. 

enable

 - Enable the IPv6 state of the IP interface. 

disable

 - Disable the IPv6 state of the IP interface. 

ip_mtu

 - Specifies the IP Layer MTU value used. 

<value 512-1712>

 - Enter the IP Layer MTU value used here. The value must be between 

512 and 1712. 

ipv4 state

 - The state of the IPv4 interface. 

enable

 - Enable the IPv4 state of the IP interface. 

disable

 - Disable the IPv4 state of the IP interface. 

dhcpv6_client

 - Specifies the DHCPv6 client state of the interface. 

enable

 - Specifies that the DHCPv6 client state of the interface will be enabled. 

disable

 - Specifies that the DHCPv6 client state of the interface will be disabled. 

ip_directed_broadcast

 - Specifies to enabled or disabled the IP directed-broadcast state of a 

specified interface. 

enable

 - Specifies to enabled the IP directed-broadcast state of a specified interface. 

disable

 - Specifies to disabled the IP directed-broadcast state of a specified interface. 

dhcp_option12

 - Specifies to clear the DHCP Option 12 hostname setting. If host name is 

empty, system name will be used to encode Option 12. 

hostname

 - Specifies the DHCP Option 12 hostname used. 

<hostname 63>

 - Enter the DHCP Option 12 hostname used here. This name can be up 

to 63 characters long. 

clear_hostname

 - Specifies to clear the DHCP Option 12 hostname setting. 

state

 - Specifies the state of this function. 

enable

 - Specifies that the clear DHCP Option 12 hostname setting will be enabled. 

Summary of Contents for xStack DGS-3420 Series






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3420 Series

C&H Technologies M221 Specifications preview
M221
Brand: C&H Technologies Pages: 1
D-Box G3 Installation Manual preview
G3
Brand: D-Box Pages: 31
Meridian SX-4FX Series Installation & Operation Instructions preview
SX-4FX Series
Brand: Meridian Pages: 16
DANLERS TLSW HB Installation Notes preview
TLSW HB
Brand: DANLERS Pages: 2
CyberData 4-Port PoweredUSB 2.0 Hub 011006 Quick Reference Manual preview
4-Port PoweredUSB 2.0 Hub 011006
Brand: CyberData Pages: 4
H3C DA-06D12 User Manual preview
DA-06D12
Brand: H3C Pages: 10
Extreme Networks ExtremeSwitching SLX 9540 Hardware Installation Manual preview
ExtremeSwitching SLX 9540
Brand: Extreme Networks Pages: 108
TP-Link Tapo S210 User Manual preview
Tapo S210
Brand: TP-Link Pages: 28
CableTronix CTMS-16RKPS Installation Manual preview
CTMS-16RKPS
Brand: CableTronix Pages: 4
H3C S5130-EI Series Manual preview
S5130-EI Series
Brand: H3C Pages: 32
YOKOGAWA GRVSW-660FA Technical Information preview
GRVSW-660FA
Brand: YOKOGAWA Pages: 74
IOGear GCS1792 Installation Manual preview
GCS1792
Brand: IOGear Pages: 40
KDS KD-MSW8x3 Operating Instructions Manual preview
KD-MSW8x3
Brand: KDS Pages: 10
Blueridge Digi-Touch DDN-SW1 Installation Manual preview
Digi-Touch DDN-SW1
Brand: Blueridge Pages: 13
3Com LANPLEX 2500 EXTENDEDPLEX 2500 EXTENDED User Manual preview
LANPLEX 2500 EXTENDEDPLEX 2500 EXTENDED
Brand: 3Com Pages: 186
NETGEAR GSM7352S - ProSafe Switch - Stackable User Manual preview
GSM7352S - ProSafe Switch - Stackable
Brand: NETGEAR Pages: 628
Tripp Lite B005-DPUA4 Owner'S Manual preview
B005-DPUA4
Brand: Tripp Lite Pages: 12
3onedata IES2305 Series Quick Installation Manual preview
IES2305 Series
Brand: 3onedata Pages: 3

Brands by name

Popular brands

Load more brands