DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
52
Time Zone Settings
The following window is used to configure time zones and Daylight Savings time settings for SNTP. Open the
Configuration
folder, click
SNTP Settings,
and click the
Time Zone Settings
link, revealing the following window.
Figure 6- 32. Time Zone Settings window
The following parameters can be set:
Parameter Description
Daylight Saving Time State
Use this pull-down menu to enable or disable the DST Settings.
Daylight Saving Time Offset In Minutes
Use this pull-down menu to specify the amount of time that will
constitute your local DST offset -
30
,
60
,
90
, or
120
minutes.
Time Zone Offset From GMT In +/- HH:MM
Use these pull-down menus to specify your local time zone's offset
from Greenwich Mean Time (GMT.)
DST Repeating Settings
- Using repeating mode will enable DST seasonal time adjustment. Repeating mode
requires that the DST beginning and ending date be specified using a formula. For example, specify to begin DST on
Saturday during the second week of April and end DST on Sunday during the last week of October.
From: Which Week Of The Month
Enter the week of the month that DST will start.
From: Day Of Week
Enter the day of the week that DST will start on.
From: Month
Enter the month DST will start on.
From: Time In HH:MM
Enter the time of day that DST will start on.
To: Which Day
Enter the week of the month the DST will end.