manualshive.com logo in svg

D-Link xStack DGS-3200 Series, User Manual, Page: 132 / 287

Share
Download
D-Link xStack DGS-3200 Series User Manual Download Page 132

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

118 

     

All Ports 

Tick this check box to configure this IP-MAC binding entry (IP A MAC Address) for all 
ports on the Switch.  

 

 

NOTE:

 When configuring the ACL mode function of the IP-MAC binding function, please pay 

close attention to previously set ACL entries. Since the ACL mode entries will fill the first two 
available access profiles and access profile IDs denote the ACL priority, the ACL mode entries 
may take precedence over other configured ACL entries. This may render some user-defined 
ACL parameters inoperable due to the overlapping of settings combined with the ACL entry 
priority (defined by profile ID). For more information on ACL settings, please see the next 
chapter. 

 

 

NOTE:

 Once ACL profiles have been created by the Switch through the IP-MAC binding 

function, the user cannot modify, delete, or add ACL rules to these ACL mode access profile 
entries. Any attempt to modify, delete, or add ACL rules will result in a configuration error.  

 

 

NOTE: 

When uploading configuration files to the Switch, be aware of the ACL configurations 

loaded, as compared to the ACL mode access profile entries set by this function, which may 
cause both access profile types to experience problems.

 

 

IP-MAC Binding Blocked 

This window allows users to view unauthorized devices that have been blocked by IP-MAC binding restrictions. 

To open the

 IP-MAC Binding Blocked

 window shown below, click 

Security

 > 

IP-MAC Port

 

Binding

 > 

IP-MAC Binding

 

Blocked

. 

 

Figure 9- 6. IP-MAC Binding Blocked window 

To find an unauthorized device that has been blocked by the IP-MAC binding restrictions, enter the VLAN name and MAC 
Address in the appropriate fields and click 

Find

. To delete an entry click the 

Delete

 button corresponding to the entry’s MAC 

address on the table at the bottom of the window. To delete all the entries on the table,

 

click 

Clear All

. 

 

Summary of Contents for xStack DGS-3200 Series
































































































































































































































































































Reviews:

No comments