manualshive.com logo in svg

D-Link xStack DGS-3200 Series, User Manual, Page: 254 / 287

Share
Download
D-Link xStack DGS-3200 Series User Manual Download Page 254

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

240 

television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures

: 

• 

Reorient or relocate the receiving antenna. 

• 

Increase the separation between the equipment and receiver. 

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

• 

Consult the dealer or an experienced radio/TV technician for help. 

 

 

For detailed warranty information applicable to products purchased outside the United States, please contact the 
corresponding local D-Link office. 

 

 

Product Registration

 

 

 

 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Register your D-Link product online at 

http://support.dlink.com/register/

 

Product registration is entirely voluntary and failure to complete or return this form will not diminish
your warranty rights.

 

Summary of Contents for xStack DGS-3200 Series
































































































































































































































































































Reviews:

No comments