D-Link ShareCenter Pro User Manual Download Page 63

Page: 63 / 163

3.5.7 Restore factory default settings

The Restore Factory Default function allows you to restores settings (any or
all) to their default values for the NAS.

The settings include:

−

CIFS Settings

−

FTP Settings

−

AFP Settings

−

SNMP Settings

−

NFS Settings

−

WebDAV Settings

−

Network Settings

Caution:

Use this feature only when required and only on the settings

that you must reset to default in order to set them correctly.

To restore the factory default settings:
1.

Click

AdminTool

tab

> Restore Factory Default

In the Restore factory default settings screen, check the boxes beside
the settings you want to reset to default value.

Click the

Submit

button.

Click the

button in the confirmation box.

Summary of Contents for ShareCenter Pro




































































































































































Search results

Summary of Contents for ShareCenter Pro

Reviews:

Related manuals for ShareCenter Pro

Brands by name

Popular brands

D-Link ShareCenter Pro, User Manual

Search results

Summary of Contents for ShareCenter Pro

Reviews:

Related manuals for ShareCenter Pro

Brands by name

Popular brands