D-Link ShareCenter 2Go - DNS-213 User Manual Download Page 84

Page: 84 / 87

D-Link ShareCenter™ 2Go User Manual

Section 3 - Configuration

P2P Downloads

Setting

P2P

Auto Download

Port Settings

Seeding

Encryption

Bandwidth

Control

Click the Enable radio button to turn on Peer to

Peer Downloading function. Check the Disable radio

button to turn it off.

Click the Enable radio button to automatically start

the download of any newly added torrent files.

Click Automatic radio button to allow the DNS to

select the TCP incoming connection port to use for

the file download. Click the Custom radio button to

manual define a port.

Select the options for Seeding the file to other Peer

to Peer users downloading the same file.

Seed until removed

Stop Seeding after (input the

minutes allowed to seed while

downloading the file)

Stop seeding when meet (input

size in percentage of the file

being downloaded as the point
to stop seeding)

Turn on the Peer to Peer encryption capability.

Click Automatic to allow the DNS to configure

the download and upload rates. Click Manual to

configure the Maximum upload and download rates

in the entry fields below. Configuring 1 in the field

sets the rate to unlimited.

Summary of Contents for ShareCenter 2Go - DNS-213
























































































Search results

Summary of Contents for ShareCenter 2Go - DNS-213

Reviews:

Related manuals for ShareCenter 2Go - DNS-213

Brands by name

Popular brands

D-Link ShareCenter 2Go - DNS-213, User Manual

Search results

Summary of Contents for ShareCenter 2Go - DNS-213

Reviews:

Related manuals for ShareCenter 2Go - DNS-213

Brands by name

Popular brands