D-Link ShareCenter 2Go - DNS-213 User Manual Download Page 29

Page: 29 / 87

D-Link ShareCenter™ 2Go User Manual

Section 3 - Configuration

LAN Setup

The Local Area Network settings for the ShareCenter™ 2Go are configured on the LAN Setup page.

DHCP Client

Static IP

MTU

DNS1 / DNS2

Selecting DHCP Client will cause the ShareCenter™

2Go to obtain an IP address from the local DHCP

server. This is the default setting. If no DHCP server

is detected, the device will use the default Auto IP

address of 169.254.xxx.xxx.

Selecting Static IP requires you to assign the IP

information for the ShareCenter™ 2Go manually.

Enter the IP address, subnet mask, and gateway

IP address that you would like to assign to the

ShareCenter™ 2Go in their respective fields.

Maximum Transmission Unit. You may need to

change the MTU for optimal performance on your

LAN connection. 1500 is the default MTU.

Note:

The MTU number must be a multiple of 4

between 90 and 1500.

If you would like to use a DNS service, enter the DNS

server IP addresses that you would like to use in the

DNS1

and

DNS2

entry fields.

Click on the

Save Settings

button to apply and save the new settings.

If you are changing the IP address or DHCP client status of the device, it will be necessary to log in again using the

new IP address. If you do not know the new IP address (as would likely be the case when changing from a static IP

address to DHCP client) use the Easy Search Utility on the Installation CD to learn the IP address of the device.

Use the radio buttons to enable or disable

the

LLTD

(Link Layer Topology Discovery)

responder setting. This is used to provide

information to network topology display monitors,

such as the one included in Windows Vista.

LLTD Settings

Summary of Contents for ShareCenter 2Go - DNS-213
























































































Search results

Summary of Contents for ShareCenter 2Go - DNS-213

Reviews:

Related manuals for ShareCenter 2Go - DNS-213

Brands by name

Popular brands

D-Link ShareCenter 2Go - DNS-213, User Manual

Search results

Summary of Contents for ShareCenter 2Go - DNS-213

Reviews:

Related manuals for ShareCenter 2Go - DNS-213

Brands by name

Popular brands