D-Link ShareCenter 2Go - DNS-213 User Manual Download Page 81

Page: 81 / 87

D-Link ShareCenter™ 2Go User Manual

Section 3 - Configuration

Scheduling

Schedule Backups List

Progress

Download URL

Save To

Modify

Delete

Displays the progress of the file or folder that is being

downloaded. If the download is a file, this field uses

a bar and percentage value to indicate the download

progress. If the download is a folder, the field only

indicates when the download has completed and

does not indicate the progress of the folder download.

Indicates the source URL/file path.

If a file is available for download, click the

Now

Download

button to start downloading the file.

Indicates the location on the ShareCenter™ 2Go that

the download file/folder will be saved to.

Select the Backup and then click Modify to view the

settings in the Schedule Backups Settings. Then edit

them as required.

To remove a download from the Schedule List, click

the backup download to select it and then click the

Delete

button.

The Schedule Backup’s List displays the completed, active, and pending scheduled downloads and backups.

Summary of Contents for ShareCenter 2Go - DNS-213
























































































Search results

Summary of Contents for ShareCenter 2Go - DNS-213

Reviews:

Related manuals for ShareCenter 2Go - DNS-213

Brands by name

Popular brands

D-Link ShareCenter 2Go - DNS-213, User Manual

Search results

Summary of Contents for ShareCenter 2Go - DNS-213

Reviews:

Related manuals for ShareCenter 2Go - DNS-213

Brands by name

Popular brands