D-Link DAP-2622 User Manual
7
Hardware Overview
LEDs
Connections
2
LAN (PoE) Port
Connect to a Power over Ethernet (PoE) switch or router via
an Ethernet cable.
3
Lan (PoE Out) Port
Gigabit RJ-45 port for data and PSE out.
4
Ethernet LAN Port Gigabit RJ-45 port for data.
5
Reset Button
Press and hold for five seconds to reset the access point to
the factory default settings. Press and hold for ten seconds
to reboot the access point.
1
Power/Status
Solid Red
Indicates the access point has malfunctioned.
Blinking Red
This LED will blink during boot-up.
Solid Green
Indicates that the DAP-2622 is working
properly.
1
3
4
5
2