D-Link Nuclias Connect DAP-2622 User Manual Download Page 59

Page: 59 / 86

D-Link DAP-2622 User Manual

Filters

This page allows the user to configure Wireless MAC ACL settings for access control.

Wireless Band:

Access Control List:

MAC Address:

MAC Address List:

Current Client

Information:

Upload File:

Load ACL File to Hard

Drive:

Displays the current wireless band rate.

Select

Disable

to disable the filters function.

Select

Accept

to accept only those devices with MAC

addresses in the Access Control List. All other devices

not on the list will be rejected.

Select

Reject

to reject the devices with MAC

addresses on the Access Control List. All other devices

not on the list will be accepted.

Enter each MAC address that you wish to include in

your filter list, and click

Apply

When you enter a MAC address, it appears in this list.

Highlight a MAC address and click

Delete

to remove

it from this list.

This table displays information about all the current

connected stations.

To upload a ACL list file, click

Browse...

and navigate

to the ACL list file saved on the computer, and then

click

Upload.

To download ACL list file, click

Download

and to save

the ACL list.

Wireless MAC ACL

Summary of Contents for Nuclias Connect DAP-2622























































































Search results

Summary of Contents for Nuclias Connect DAP-2622

Reviews:

Related manuals for Nuclias Connect DAP-2622

Brands by name

Popular brands

D-Link Nuclias Connect DAP-2622, User Manual

Search results

Summary of Contents for Nuclias Connect DAP-2622

Reviews:

Related manuals for Nuclias Connect DAP-2622

Brands by name

Popular brands