D-Link Nuclias Connect DAP-2622 User Manual Download Page 34

Page: 34 / 86

D-Link DAP-2622 User Manual

The

Add/Edit VLAN

tab is used to configure VLANs. Once you have made the desired changes, click the

Save

button to let your changes take

effect.

VLAN Status:

VLAN Mode:

VLAN ID:

VLAN Name:

Save:

Click the radio button to enable or

disable VLAN status. By default this

feature is disabled.

Displays the current VLAN mode.

Enter a value (1-4094) for the Internal

VLAN.

Enter the VLAN name to add or modify.

Click to save the updated configuration.

To make the updates permanent, click

Configuration > Save and Activate.

Add/Edit VLAN

From the Port fields, select the radio button to set Untag/Tag/Not

Member settings to the Mgmt (management) and LAN ports. The port

configuration functions are also available for the defined 2.4GHz and

5GHz ports.

Untagged ports are used for connecting to client devices, such as a

computer host. While tagged ports are designated for VLAN trunk

links.

Summary of Contents for Nuclias Connect DAP-2622























































































Search results

Summary of Contents for Nuclias Connect DAP-2622

Reviews:

Related manuals for Nuclias Connect DAP-2622

Brands by name

Popular brands

D-Link Nuclias Connect DAP-2622, User Manual

Search results

Summary of Contents for Nuclias Connect DAP-2622

Reviews:

Related manuals for Nuclias Connect DAP-2622

Brands by name

Popular brands