D-Link i2eye DVC-1000 Product Manual Download Page 60

Page: 60 / 69

QoS (Quality of Service):

Allows.guaranteed.bandwidth.and.packet.delivery.

between.

network.devices.over.a.network.

Router:

A.device.that.attaches.two.or.more.network.devices.and.forwards.data.

accordingly. Most consumer type routers act as DHCP servers, NATs

and firewalls.

DMZ (Demilitarized Zone):

Devices set up to be in the router’s DMZ will see

all network traffic.

Port Forwarding:

The.router.will.forward.public-side.incoming.information.to.a.

specified device on the private side. The router will forward only the data

that is received on the specified ports. This is usually set through the

advanced.settings.in.the.router’s.web.interface..Also.known.as

Virtual

Server

or.

Firewall Rules.

Ports:

A port is a specified path in which data travels. Each type of data that is

transmitted over the Internet travels down a specified port. A router will

forward information from one port to another, and a firewall will open

only a specified number of ports.

SQCIF (Subquarter Common Intermediate Format):

An.intermediate.video.

format..SQCIF.resolution.is.128x..The.DVC-1000.VideoPhone.will.

send. SQCIF-sized.video. only. if.the.remote. endpoint. cannot. decode.

CIF.or.QCIF..

SLIC (Subscriber-Line Interface Circuit):

Provides. a. phone’s. analog. dial.

tone, busy tone, dual-tone multiple-frequency (DTMF) generation and

decoding,.caller.ID.and.ring-signaling.functions..The.SLIC.allows.the.

DVC-1000.to.work.with.a.standard.telephone.without.connecting.to.the.

phone.system.

TCP (Transmission Control Protocol):

An. Internet. protocol. used. by. the..

DVC-1000.VideoPhone.in.addition.to.UDP.

UDP (User Datagram Protocol):

The.Internet.protocol.most.commonly.used.by.

the.DVC-1000.VideoPhone.to.send.and.receive.audio.and.video.data..

WAN (Wide Area Network):

A.network.that.is.designed.to.span.large.distances..

See.LAN..

Glossary of Terms (continued)

Summary of Contents for i2eye DVC-1000






































































Search results

Summary of Contents for i2eye DVC-1000

Reviews:

Related manuals for i2eye DVC-1000

Brands by name

Popular brands

D-Link i2eye DVC-1000, Product Manual

Search results

Summary of Contents for i2eye DVC-1000

Reviews:

Related manuals for i2eye DVC-1000

Brands by name

Popular brands