31
Using the Configuration Menu (continued)
Advanced > Virtual Server
The DI-704P is also capable of port-redirection meaning incoming traffic to a particular
port may be redirected to a different port on the server computer. Each virtual services
that are created will be listed at the bottom of the screen in the Virtual Servers List.
There are already pre-defined virtual services already in the table. You may use them
by enabling them and assigning the server IP to use that particular virtual service.
Name:
The name referencing the virtual service.
Private IP:
The server computer in the LAN (Local Area Network) that will be providing the virtual
services.
Private Port:
The port number of the service used by the Private IP computer.
Protocol Type:
The protocol used for the virtual service.
Public Port:
The port number on the WAN side that will be used to access the virtual service.
Schedule:
The schedule of time when the virtual service will be enabled. The schedule may be
set to Always, which will allow the particular service to always be enabled. If it is set
to Time, select the time frame for the service to be enabled. If the system time is
outside of the scheduled time, the service will be disabled.
Example #1:
If you have a Web server that you wanted Internet users to access at all times, you
would need to enable it. Web (HTTP) server is on LAN (Local Area Network) computer
192.168.0.25. HTTP uses port 80, TCP.
Name: Web Server
Private IP: 192.168.0.25
Protocol Type: TCP
Private Port: 80
Public Port: 80
Schedule: always
