manualshive.com logo in svg

D-Link Express Ethernetwork DI-704P, User Manual

Looking for a user manual for your D-Link Express Ethernetwork DI-704P? Look no further! Download the comprehensive manual for free from manualshive.com, providing all the information you need to optimize your networking experience with this top-notch product.

Share
Download
background image

43

Using the Configuration Menu (continued)

Advanced > SNMP

SNMP (Simple Network Management Protocol) is a widely used network monitoring and
control protocol that reports activity on each network device to the administrator of the
network. SNMP can be used to monitor traffic and statistics of the DI-704P. The DI-
704P supports SNMP v1.

Enabled or Disabled:

Click 

Enabled 

to enable SNMP  click 

Disabled

 to deactivate SNMP.

Get Community:

“Read only” access for network administration using SNMP.  You can view the network,
but no configuration is possible wth this setting.

Set Community:

“Read and Write” access for network administration using SNMP.  The administrator can
configure the network with this setting.

Local:

SNMP services will be available on the Local (LAN) network.

Remote:

SNMP services will be available on the remote (WAN) network.

Summary of Contents for Express Ethernetwork DI-704P
































































































Reviews:

No comments

Related manuals for Express Ethernetwork DI-704P

Brands by name

Popular brands

Load more brands