11
Network Setup
Turn everything off.
A.
Power OFF your Cable or DSL modem. If you modem does
not have an on/off switch, disconnect the power cable.
B.
Turn OFF your computer.
C.
Do
NOT
connect the power adapter to your D-Link router.
Connect the D-Link Router Cables.
A.
Connect the Ethernet (or networking) cable from the Cable or
DSL modem to the WAN port of the router.
B.
Use the D-Link supplied Ethernet cable to connect the Ethernet
port (Network Card) of your computer to one of the LAN ports of
the router. The complete setup should look like Fig.1 shown above.
Power up the devices in sequence.
A.
Power up the Cable or DSL modem.
Wait
until the modem has
made the connection to your Internet Service Prover’s (ISP’s)
network.
B.
Power up the D-Link router by connecting the D-Link provided
power adapter to the router and to an available power outlet.
C.
Turn on your computer.
D.
Now, refer to either the
Quick Installation Guide
or continue
to follow this manual to complete the installation process.
Note:
Please see the Manual included with your modem for an explanation of
the modem’s LEDs.
