90
Resetting the DI-704P
to the Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to
Reset
the DI-704P to the factory default settings.
To hard-reset the D-Link DI-704P to the Factory Default Settings, please do
the following:
!
!
Use a paper clip to press the
Reset
button and
power on
Locate the
Reset
button on the back of the DI-704P
!
Turn off the DI-704P
!
After you have completed the above steps, the DI-704P
will be reset to the factory default settings
!
Hold for about 5 seconds (don’t hold too long) and
then release. (Or, release when M1 and M2 flash
at the same time.)