1 Product Introduction
D-Link Smart Managed Switch User Manual
3
3
Blinking:
Indicates that the Switch is either sending or receiving data to the port.
Green:
Indicates that the port is running at 1000M.
Amber:
Indicates that the port is running at 10/100M.
Light off:
No link.
PoE MAX. LED:
Light up:
Indicates the power output to PDs is over 73W. No additional PDs can be powered for
safety consideration.
Blinking:
Indicates if the user unplugged certain PDs and made the PoE power budget left over 7W,
the PoE MAX LED will blink 5 seconds.
Light off:
Indicates the power budget is using less than 73W.
PoE LED (Port 1-4):
Solid Green:
PD is connected and power is supplied.
Solid Amber:
PD is connected but failure occured.
Light off:
No PD is connected.
CAUTION:
The equipment power supply cord shall be connected
to a socket-outlet with earthing connection.
Rear Panel
Figure 1.2 - DGS-1100-08PLV2 Rear Panel
Power:
Input for a 54V/1.67A AC adapter.
Kensington Lock:
This is used to attach a physical Kensington security lock.
GND:
This is used to connect the Switch to ground.
LED Indicators
The Switches feature LED indicators for Power and Link/Act for each port. The following shows the LED
indicators for the Switch along with an explanation of each indicator.
Figure 1.3 - LED Indicators on DGS-1100-08PLV2
Location
Indicator LED
Color
Status
Description
Per Device
Power
Green
Solid Light
The device is powered on.
Light off
The device is powered off.
PoE Max.
Amber
Solid Light
When the power output to PDs is over
73W. No additional PDs can be
powered for safety consideration.
Blinking
If the user unplugged certain PDs and
made the PoE power budget left over
