4 Configuration
D-Link Smart Managed Switch User Manual
28
Figure 4.40 - L2 Features > VLAN > Surveillance VLAN
The fields that can be configured are described below:
Item
Description
Surveillance VLAN Global Settings
Surveillance VLAN
Specify to enable or disable the Surveillance VLAN function.
The default value is
disabled
.
VLAN ID
Specify the VLAN ID to act as the Surveillance VLAN.
Priority
Specify the priority level. The levels of priority are from 0 to 7.
The default priority is
5
.
User-defined MAC Settings
Component Type
Surveillance VLAN will automatically detect D-Link surveillance
devices by default. There are another five surveillance
components that can be configured for surveillance VLAN.
These five components are
Video Management Server
(VMS),
VMS Client
,
Video Encoder
,
Network Storage
, and
Other IP Surveillance Devices
. Usually, VMS and VMS
clients are necessary components for an IP surveillance
service.
Description
Enter a description for the component.
MAC Address
Enter a MAC address of the component.
Table 4.20
Click
Apply
to make the configurations take effect.
Click
Add
to create a new device for Surveillance VLAN.
Click
Delete
to remove the Surveillance VLAN entry.
L2 Features > VLAN > Voice VLAN
Voice VLAN is a feature that allows you to place the voice traffic from D-Link IP phones to an assigned VLAN
to enhance the IP voice service. With a higher priority and individual VLAN, the quality and the security of
voice traffic are guaranteed. The Voice VLAN function will check the source MAC address on the incoming
packets. If it matches the specified MAC address, the packets will pass through with desired priority.
