4 Configuration
D-Link Smart Managed Switch User Manual
20
Figure 4.24 - Management > SNMP > SNMP Community Table Settings
The fields that can be configured are described below:
Item
Description
Access Right
Select the access right here. Options to choose from are Read
Only, and Read Write.
•
Read Write -
SNMP community members can read
from, and write to the contents of the MIBs on the
Switch.
•
Read Only -
SNMP community members can only read
the contents of the MIBs on the Switch.
Community Name
Enter an alphanumeric string of up to 32 characters that is
used to identify members of an SNMP community. This string
is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
Table 4.9
Click
Apply
to create a new SNMP community.
Management > SNMP > SNMP Host Settings
This window is used to configure the recipients of the SNMP notifications.
Figure 4.25 - Management > SNMP > SNMP Host Settings
The fields that can be configured are described below:
Item
Description
Host IPv4 Address
Specify the IPv4 address of the SNMP management host.
User-based Security
Model
Specify the security model. The options to choose from are
SNMPv1
and
SNMPv2c
.
Community String
Specify the community string for the management host.
Table 4.10
Click
Apply
to make the configurations take effect.
Management > D-Link Discovery Protocol
For devices that support the D-Link Discovery Protocol (DDP), this window allows users to enable or disable
DDP, and configure the DDP packet report timer.
