73
D-Link M15 User Manual
Section 3 - Configuration
System Admin
Admin
This page will allow you to change the administrator (Admin) password
and enable the HTTPS service. Go to
Management >
System Admin
. To
configure the System settings, click the
System
tab. Refer to
.
Admin Password
Password
Enter a new password for the administrator account. You will need to
enter this password whenever you configure the device using a web
browser or add the device to EAGLE PRO AI.
Advanced Settings - Administration
Enable HTTPS
Management
Enable HTTPS to connect to the extender using an encrypted connection.
Instead of using
http://
XXXX
.devicesetup.net/
(where XXXX represents
the last four digits of the device's MAC address), you must use
https
://
XXXX
.devicesetup.net/
in order to connect to the device.
Note
: If you previously changed the management link in the Network
section, replace
XXXX.devicesetup.net/
with the new management link
(refer to
Settings > Network
).
Enable HTTPS
Remote
Management
Remote management allows the device to be configured over the
Internet via a web browser. A password is still required to access the web
configuration interface.
