64
D-Link M15 User Manual
Section 3 - Configuration
Static Routes
IPv4
If you click on Edit or Add Route, the following options will appear:
Name
Enter a name for the route.
Destination
Network
Enter the destination IP address of the subnetwork.
Mask
Enter the subnet mask of the destination address.
Gateway
Enter the IP address of the next hop, which is the gateway to the
remote network.
Metric
The route metric is a value from 1 to 16 that indicates the cost (or
number of hops) of using this route. A value of 1 is the lowest cost
and 16 is the highest cost.
Interface
Select the interface that the IP packet must use to transit out of the
device when this route is used.
Click
Apply
when you are done.
Go to
Features >
Static Routes
to define custom routes to control how traf-
fic moves around your network.
To configure the Static Route IPv6 settings, click the
IPv6
tab. Refer to
If you wish to remove a rule, click
in the Delete column. If you wish to edit a
rule, click
in the Edit column. If you wish to create a new rule, click the
Add
Rule
button.
