62
D-Link M15 User Manual
Section 3 - Configuration
Port Forwarding
If you edit or create a rule, the following options will appear:
Name
Enter a name for the rule.
Local IP
Enter the IP address of the device on your local network to which
the port will be forwarded. Alternatively, select the device from the
drop-down menu.
TCP Port
Enter the TCP ports that you want to forward. You can enter a single
port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000).
UDP Port
Enter the UDP ports that you want to forward. You can enter a single
port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000).
Schedule
Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to
Always Enable
, or
you can create your own schedules in the
Schedule
section. Refer to
Time & Schedule - Schedule
for more information.
for more information.
Click
Apply
when you are done.
Go to
Features >
Port Forwarding
to specify a port or range of ports to
open for specific devices on the network. This might be necessary for certain
applications to connect through the router. For example, access from the
Internet can be redirected to a DMZ host using Port Forwarding.
To configure the Virtual Server settings, click the
Virtual Server
link. Refer to
.
If you want to remove a rule, click
in the Delete column. If you wish to edit
a rule, click
in the Edit column. If you wish to create a new rule, click the
Add Rule
button.
