75
D-Link M15 User Manual
Section 3 - Configuration
System
This page will allow you to back up or restore configuration settings or restore
settings from a previous backup. It also allows you to set up a reboot schedule
for automatic reboot. Go to
Management >
System Admin
, then click
System
to access this page.
System
Save Settings
To Local Hard
Drive
Click
Save
to download a backup of your current configuration settings
to your local hard drive. This backup can later be used to restore your
settings.
Load Settings
From Local Hard
Drive
Click
Select File
to browse your local hard drive for a configuration file
to restore your configuration settings from. Once selected, click
Restore
to apply the settings from the configuration backup.
Restore To
Factory Default
Settings
Click
Restore
to restore all configuration settings back to the settings
that were in effect at the time the device was shipped from the factory.
Any settings that have not been saved will be lost, including any rules
that you have created.
Auto Reboot Configuration
Reboot the
Device
Click the
Reboot
to reboot the device immediately.
Auto Reboot
Use the drop-down menu to select a schedule for the device to
reboot automatically. The schedule may be set to
Never
,
Daily
, or
Weekly
. Depending on your selection, set a time and week day for
the auto reboot schedule.
Click
Save
when you are done.
