This creates a logical routing interface with the slot/port designation of 4/5 for VLAN 5.
11. To create a routing interface for VLAN 250, enter 250 into the
VLAN ID
field and select
Create.
This creates a logical routing interface with the slot/port designation of 4/6 for VLAN
250.
12. Navigate to
L3 Features
Æ
IP
Æ
Interface Configuration
.
13. Select interface 4/5 from the Slot/Port drop-down menu and enter the following
information:
a. IP Address: 172.17.5.253
b. Subnet Mask: 255.255.255.0
c. Routing Mode: Enable
14. Click
Submit
.
15. Select interface 4/6 from the Slot/Port drop-down menu and enter the following
information:
a. IP Address: 192.168.250.254
b. Subnet Mask: 255.255.255.0
c. Routing Mode: Enable
16. Click
Submit
.
17. Verify the VLAN Routing information on the
Monitoring
Æ
L3 Status
Æ
VLAN
Routing Summary
page.
3.1.3 Configure Routing
You must configure routes on the Wireless Switch for integration with the simulated
customer network. You can either configure static routes for each network you need
access to at the Wireless Switch or you can configure a default route. The wireless
switch at a minimum requires IP access to the “remote” AP that is connected via the L3
router to allow the Unified Access System to manage that remote AP. Other routes (or a
default route) provide access for clients to reach other networks.
The following
default route
can be added on the Wireless switch.
Customer Network Address
Mask
Next Hop IP Address
0.0.0.0
0.0.0.0
172.17.5.254
Note:
Interface
172.17.5.254
is a counterpart router interface on the L3 device attached to port
0/24 on the wireless switch. Port 0/24 is associated with the VLAN routing interface 5, which has
an IP address of 172.17.5.253.
Use the following procedures to create the default route.
1. From the LAN tab, navigate to
L3 Features
Æ
Router
Æ
Configured Routes
.
2. Select
Default
from the Route Types drop-down menu.
3. In the Next Hop IP Address field, enter 172.17.5.254, which is the IP address of
the interface on the “customer” L3 device that is connected to port 0/24.
