1. Click
L3 Features -> Loopbacks -> Configuration
2. If they are not already selected, select Create from the
Loopback
field and 0 in the
Loopback Interface
field.
3. Click
Submit.
4. After the screen refreshes, enter the following information for the new interface:
a.
Loopback Interface
: 0
b.
IP Address
: 192.168.10.254
c.
Mask
: 255.255.255.255
5. Click
Submit.
2.1.6 DHCP Server
You need to configure IP address pools for each AP and for the clients that connect to the APs
through the D-LINK NET1 and DLINK-NET2 SSIDs.
1. From the LAN menu, click Administration
Æ
DHCP Server
Æ
Global Configuration
2. In
the
Admin Mode
field, select Enable, then click
Submit
to enable the DHCP server..
3. Select
Pool Configuration
in the Navigation tree.
4. For each of the four pools to create, select
create
and specify the following settings:
Pool Name
AP1
AP2
VLAN 100
VLAN 200
Type of
Binding
Dynamic Dynamic Dynamic Dynamic
Network
Number
192.168.20.0 192.168.30.0 192.168.100.0 192.168.200.0
Network Mask
255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0
Days
1 day
1 day
1 day
1 day
Hours
0 0 0 0
Minutes
0 0 0 0
Default Router
Address
192.168.20.254
192.168.30.254
192.168.100.254 192.168.200.254
5. Click
Submit
to create the address pool.
