14. Create Rule 3 to allow all other type of traffic between any source and any destination
since as mentioned earlier, there is an implicit “deny all” rule at the end of every ACL.
15. From the
Rule
drop-down menu, select Create.
16. Enter 3 into the
Rule ID
field, Permit into the
Action
field, and True in the
Match
Every
field, and then click
Submit.
Next, you must attach the ACL to port 0/1 and port 0/13 so that the rules are applied to
the appropriate wireless client traffic that goes through the APs connected to the switch.
1. From
the
ACL
Æ
Interface Configuration
page,
2. Select port 0/1 from the
Slot/Port
drop-down menu.
3. Select IP ACL as the
ACL Type
.
4. Enter 1 as the sequence number, and click Submit.
5. Repeat the steps to associate ACL 100 with port 0/13.