D-Link DWL-3200AP - AirPremier - Wireless Access Point Product Manual Download

Page: 110 / 113

110

DWL-3200AP User’s Manual

D-Link Systems, Inc.

Contacting Technical Support

Contacting Technical Support

Technical Support

You can ﬁnd software updates and user documentation on the D-Link website.

D-Link provides free technical support for customers within the United States and
within Canada for the duration of the warranty period on this product.

U.S. and Canadian customers can contact D-Link Technical Support through our
website, or by phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 453-5465

Monday to Friday 8:00am to 5:00pm PST

D-Link Technical Support over the Internet:

http://support.dlink.com

e-mail:[email protected]

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

(800) 361-5265

Monday to Friday 7:30am to 9:00pm EST

D-Link Technical Support over the Internet:

http://support.dlink.ca

e-mail:[email protected]

Summary of Contents for DWL-3200AP - AirPremier - Wireless Access Point


















































































































Search results

Summary of Contents for DWL-3200AP - AirPremier - Wireless Access Point

Reviews:

Related manuals for DWL-3200AP - AirPremier - Wireless Access Point

Brands by name

Popular brands

D-Link DWL-3200AP - AirPremier - Wireless Access Point, Product Manual

Search results

Summary of Contents for DWL-3200AP - AirPremier - Wireless Access Point

Reviews:

Related manuals for DWL-3200AP - AirPremier - Wireless Access Point

Brands by name

Popular brands