DVG-7111S
User’s Manual
ADVANCED
D-Link Systems, Inc.
52
FXO Line VoIP call in options:
Set FXO dial-out mode when the VoIP call indicates the FXO extension
number.
Caller Indicate Dial-Out:
When someone makes a call to this FXO port from Internet, it will dial
to PSTN with the number assigned in SIP packet.
Default Dial-Out:
When some one makes a call to this FXO port from Internet, it will dial to PSTN
with the number
filled in “FXO Line Default Dial-Out”.
Trunk Incoming Prompt Voice:
Select the greeting when FXO receives an inbound call (transit in).
Enable FXO/Trunk Extension Number:
Allows user to dial just the FXO extension
– 702 - to use when
the PSTN line is connected on the FXO port.
Pick up Line by Dialing Extension Number:
Allows 2-stage dialing from VoIP to PSTN. After hearing
the second dial tone, dial the PSTN number.
Hot Line:
Check to direct the call automatically to a pre-configured destination without any action when
the FXS is off-hook. (ie. as the user picks up the phone). When the FXS is under Hot Line mode, no
other phone numbers can be dialed.
Ring count before FXO pick up:
Enter the ring count before FXO answer the call for detecting Caller
ID sent from PSTN.
Transit In Busy Tone Limit:
The duration VoIP TA plays a busy tone before FXO hook-on. To notify
the caller from PSTN that this call is finished.
ADVANCED
→
VoIP
→
Hot Line
Browse:
Click the
Browse
button to locate a saved voice file.
Upload:
Once you locate the file, click
Upload
to update the greeting file.
Backup:
Click the
Backup
button to save your current settings to a file.
Clear Gretting:
Click the
Clear Gretting
button to delete the curretn voice file.
