![background image](http://html.mh-extra.com/html/d-link/dvg-7111s/dvg-7111s_user-manual_17020028.webp)
DVG-7111S
User’s Manual
SETUP
D-Link Systems, Inc.
28
Lease Time:
Enter the length of time for the IP lease.
Domain Name Server Assignment:
Select
Auto
or
Manual
to get the IP address of Domain Name
Server assigned by ISP or manually.
Domain Name Server IP:
Enter the primary and secondary IP address of Domain Name Server if
Domain Name Server Assignment is
Manual
. Otherwise, the VoIP TA will not be able to access hosts
using hostnames instead of IPs.
SETUP
→
LAN Setup
Enable Port:
It is to active/des-active LAN port physical connection.
Incoming Rate Limit:
Set the incoming (from LAN to WAN) rate limit of a specific LAN port (can not
exceed the real downstream bandwidth).
Outgoing Rate Limit:
Set the outgoing (from WAN to LAN) rate limit of a specific LAN port (can not
exceed the real upstream bandwidth).
NAT/Bridge:
Select the VoIP Router serving as a
Router
with NAT or
Bridge
between WAN port and
LAN port without NAT.
Note:
If you set a LAN port to be bridge mode that the LAN port will be bundled with WAN. If you
would like to connect to DVG-N5412SP at the bridged LAN port you must enter WAN port IP.
VLAN ID:
Assign a VLAN ID for DVG-N5412SP to transit traffic through-out at WAN port for WAN-LAN
bridge mode. The packets are un-tagged at LAN port and added tag at WAN port.
Note:
It is not allowed to change VLAN ID for NAT mode LAN ports. The VLAN ID of NAT LAN
ports are bundled with WAN 1 which assigned at Internet Setting page. The packets are un-tagged
at LAN port and added tag at WAN port.