D-Link DVG-5802S User Manual Download

Page: 4 / 102

D-Link DVG-580S User Manual

Section 1 - Product Overview

• D-Link DVG-580S Wireless

N Gigabit Multimedia

VoIP Gateway

• Non-detachable Antennas
• Power Adapter
• CAT5e Ethernet Cable
• CD-ROM with Installation Wizard, User Manual

System Requirements

• Ethernet-based Cable or DSL Modem
• Computers with Windows

, Macintosh

, or Linux-based operating systems with an installed Ethernet

adapter

• Internet Explorer Version 6.0, Mozilla 1.7.1 (5.0), or Firefox 1.5

and above (for configuration)

• Installation Wizard requires Windows

XP with Service Pack

Product Overview

Package Contents

Note: Using a power supply with a different voltage rating than the one included with the DVG-580S will cause damage and void the
warranty for this product.

Summary of Contents for DVG-5802S







































































































Search results

Summary of Contents for DVG-5802S

Reviews:

Related manuals for DVG-5802S

Brands by name

Popular brands

D-Link DVG-5802S, User Manual

Search results

Summary of Contents for DVG-5802S

Reviews:

Related manuals for DVG-5802S

Brands by name

Popular brands