D-Link DVG-5802S User Manual Download

Page: 20 / 102

D-Link DVG-580S User Manual

Section 3 - Configuration

Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic.

Enter the LTP IP address supplied by your ISP (Static
only).

Enter the Subnet Mask supplied by your ISP (Static
only).

Enter the Gateway IP Address provided by your ISP.

Enter the Server IP provided by your ISP (optional).

Enter your LTP username.

Enter your LTP password and then retype the password
in the next box.

Select either Always-on, On-Demand, or Manual.

Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.

Enter the Primary and Secondary DNS Server Addresses
(Static LTP only).

Address Mode:

L2TP IP Address:

L2TP Subnet Mask:

L2TP Gateway:

L2TP Server IP:

Username:

Password:

Reconnect Mode:

Maximum Idle

Time:

DNS Servers:

Internet Setup

L2TP

Choose LTP (Layer Tunneling Protocol) if your ISP uses a LTP connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services.

DVG-5802S

Summary of Contents for DVG-5802S







































































































Search results

Summary of Contents for DVG-5802S

Reviews:

Related manuals for DVG-5802S

Brands by name

Popular brands

D-Link DVG-5802S, User Manual

Search results

Summary of Contents for DVG-5802S

Reviews:

Related manuals for DVG-5802S

Brands by name

Popular brands