60
D-Link DVA-2800 User Manual
Section 4 - Configuration
Advanced
DVA-2800
HW:T1
FW:AU_2.01
Features >> Firewall Settings >> Advanced
Settings
Features
Home
Management
Save
Enable DMZ:
Enabled
DMZ IP Address:
<< Computer Name
⌵
Wan Interface:
PTM0
⌵
IPv4/v6 Rules
Firewall Settings
Your router’s high-performance firewall feature continuously monitors Internet traffic, protecting your network
and connected devices from malicious Internet attacks.
Advanced Settings ...
PPTP:
Enabled
IPSec (VPN):
Enabled
RTSP:
Enabled
SIP:
Enabled
Application Level Gateway (ALG) Configuration
COPYRIGHT © 2017 D-Link
Click
Advanced
from the
Firewall Settings
page to configure advanced firewall settings.
Enable DMZ:
Enable or disable the Demilitarized Zone (DMZ). The DMZ directly
exposes a single client directly to the Internet. Enabling DMZ is not
recommended.
DMZ IP Address:
If DMZ is enabled, enter the IP address of the client you wish to expose,
or use the drop-down menu to quickly select it.
Wan Interface:
Select an interface to which to apply the DMZ.
Advanced Settings - Application Level Gateway (ALG) Configuration
PPTP:
Allows multiple machines on the LAN to connect to their corporate
network using the PPTP protocol.
IPSec (VPN):
Allows multiple VPN clients to connect to their corporate network
using IPSec. Some VPN clients support traversal of IPSec through
NAT. This Application Level Gateway (ALG) may interfere with the
operation of such VPN clients. If you are having trouble connecting
to your corporate network, try turning this ALG off. Please check with
the system administrator of your corporate network whether your
VPN client supports NAT traversal.
RTSP:
Allows applications that use Real Time Streaming Protocol (RTSP)to
receive streaming media from the Internet.
SIP:
Allows devices and applications using VoIP (Voice over IP) to
communicate across NAT. Some VoIP applications and devices have
the ability to discover NAT devices and work around them. This ALG
may interfere with the operation of such devices. If you are having
trouble making VoIP calls, try turning this ALG off.
Click
Save
when you are done.