D-Link DSR-250, Cli Reference Manual

Page: 50 / 83

Unified Services Router CLI Reference Guide
48
Sl No Command Name Description Type and Description
5 dnat_address <dnatAddr> Send to Local Server (DNAT
IP),Specifies an IP address and port
number of a machine on the Local
Network which is host IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
6 dnat_port <dnatport> The port number to use for DNAT,
required if port forwarding is enabled Port number (0..65535)
7 log <log> Enable / Disable Logs Log type,
Never/Always
8 schedule <schedule> Schedule for which the rule is
applicable String
Schedule for which the rule is
applicable
9 service_name <service> Name of the service for which a rule is
to be added String
Name of the service for which a
rule is to be added
10 snat_address <snatAddr> IP of the SNAT Address IP Address
IP of the SNAT Address
11 snat_address_type
<snatType> Type of the SNAT address snat type WAN1/Single Address
12 source_address_end
<srcAddrEnd> End IP of the Source user IP Address
End IP of the Source user
13 source_address_start
<srcAddrStart> Start IP of the Source user Start IP of the Source user
14 source_address_type
<srcType> Type of the source user Type of user address,
Any/Single Address/Address
Range
15 internet_destination
<internetDest> Enter WAN/OTHER. Set it as WAN
port, if more than one is available, that
is the internet destination for traffic
covered by this firewall rule. internet destination type
(WAN/OTHERS)
16 internet_destination_address
<internetDestAddr> The WAN IP address that will map to
the incoming server. IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
17 port_forwarding_enable
<dnatenable> enable/disable port forwarding based
on type of firewall rule configured Boolean choice (Y/N)
18 rule_type <ruleType> Type of rule to be configured firewall rule type (WAN-To-
LAN/Inbound/LAN-To-
WAN/Outbound)
19 cancel Roll back firewall ipv4 rules
configuration changes
20 exit Save firewall ipv4 rules configuration
changes and exit current mode.
21 save Save firewall ipv4 rules configuration
changes.
9.11 security firewall ipv4 delete <row_id>
Sl No Command Name Description Type and Description
1 security firewall ipv4 delete Row Id Of the rule to be deleted Integer,