D-Link DSR-250, Cli Reference Manual

Page: 23 / 83

Unified Services Router CLI Reference Guide
21
Sl No Command Name Purpose
30 vpn sslvpn users domains edit Domains edit mode
31 vpn sslvpn users domains delete Domains delete mode
32 vpn sslvpn users groups add Groups add mode
33 vpn sslvpn users groups edit Groups edit mode
34 vpn sslvpn users groups delete Groups delete mode
35 vpn sslvpn users users ip_policies configure Ip policies configure mode
36 vpn sslvpn users users ip_policies delete Ip policies delete mode
37 vpn sslvpn users users browser_policies Browser policies configuration mode
38 vpn sslvpn users users login_policies Login policies configuration mode
The command dot11 ? at the CLI prompt would give the description of all the configuration
commands in the branch dot11, which is as follows:
Sl No Command Name Purpose
1 dot11 access point configure 802.11 access point configuration mode
2 dot11 access point delete Delete an 802.11 access point.
3 dot11 access point disable Disable an 802.11 access point.
4 dot11 access point enable Enable an 802.11 access point.
5 dot11 access point mac add Add a MAC Address to ACL List of an AP
6 dot11 access point mac delete Delete a MAC Address from an ACL List of an AP.
7 dot11 radio advanced configure 802.11 advanced radio configuration mode.
8 dot11 radio configure 802.11 radio configuration mode.
9 dot11 profile configure 802.11 profile configuration mode.
10 dot11 profile delete Delete an 802.11 profile.
Each of the above listed commands has in turn a set of sub -commands to fulfill the
requirements. The command – subcommand list is given in following sections.