D-Link DSR-250, Cli Reference Manual

Page: 33 / 83

Unified Services Router CLI Reference Guide
31
Sl No Command Name Description Type and Description
5 interface Set interface for which the route is
applied String,
Valid strings (LAN/WAN)
6 metric Set the metric for this route Integer value,
Valid metric 2-15
7 private_flag Defines whether the route can be
shared with other gateways when RIP
is enabled Boolean Choice (Y/N),
Set/unset the private flag
8 subnet_mask Set the subnet for this rule. IP address,
Subnet mask
9 cancel Roll back route configuration changes.
10 exit Save static routes changes and exit
current mode.
11 save Save static route changes.
8.26 net routing static ipv4 delete <name>
Sl No Command Name Description Type and Description
1 name Unique route name String,
Route name
8.27 net routing static ipv6 configure <name>
Sl No Command Name Description Type and Description
1 name Unique route name String,
Route name
2 active_flag Defines whether its an active route Boolean choice (Y/N),
Set/unset the active flag
3 destination_address Set the destination IP. IP Address,
Destination address
4 gateway_address Set the gateway ip address IP Address,
Gateway address
5 interface Set interface for which the route is
applied Interface type,
Dedicated-WAN/LAN/6to4-WAN
6 metric Set the metric for this route Integer value,
Valid metric 2-15
7 prefix Set the prefix length for this rule. Integer,
Prefix length
8 cancel Roll back route configuration changes.
9 exit Save static routes changes and exit
current mode.
10 save Save static route changes.