D-Link DSR-1000N, User Manual

Page: 35 / 200

Unified Services Router User Manual
33
•
For finer control, the Rate profile type can be used. With this option the
minimum and maximum bandwidth allowed by this profile can be limited.
•
Choose the WAN interface that the profile should be associated with
Figu re 17: Band wid th Profile C onfigu ration page
Advanced > Advanced Network > Traffic Management > Traffic Selectors
Once a profile has been created it can then be associated with a traffic flow from the
LAN to WAN. To create a traffic selector, click Add on the Traffic Selectors page.
Traffic selector configuration binds a bandwidth profile to a type or source of LAN
traffic with the following settings:
•
Available profiles: Assign one of the defined bandwidth profiles
•
Service: You can have the selected bandwidth regulation apply to a specific service
(i.e. FTP) from the LAN. If you do not see a service that you want, you can
configure a custom service through the
Advanced > Firewall Settings > Custom
Services
page. To have the profile apply to all services, select ANY.
•
Traffic Selector Match Type: this defines the parameter to filter against when
applying the bandwidth profile. A specific machine on the LAN can be identified
via IP address or MAC address, or the profile can apply to a LAN port or VLAN
group. As well a wireless network can be selected by its BSSID for bandwidth
shaping.