D-Link DSR-1000N, User Manual

Page: 195 / 200

Unified Services Router User Manual
193
PKTLOG_TAG %s:allocation failed for
pl_info, __FUNCTION__
DEBUG PPP: couldn't register device %s (%d), ERROR
PKTLOG_TAG %s:allocation failed for
pl_info, __FUNCTION__
DEBUG
ppp: destroying ppp struct %p but
dead=%d
ERROR
PKTLOG_TAG %s: create_proc_entry
failed for %s,
DEBUG ppp: destroying undead channel %p !, ERROR
PKTLOG_TAG %s: sysctl register failed
for %s,
DEBUG
PPP: removing module but units
remain!
ERROR
PKTLOG_TAG %s: page fault out of
range, __FUNCTION__
DEBUG PPP: failed to unregister PPP device ERROR
PKTLOG_TAG %s: page fault out of
range, __FUNCTION__
DEBUG JBD: bad block at offset %u, ERROR
PKTLOG_TAG %s: Log buffer
unavailable, __FUNCTION__
DEBUG JBD: corrupted journal superblock ERROR
PKTLOG_TAG DEBUG JBD: bad block at offset %u, ERROR
Logging should be disabled before
changing bufer size
DEBUG JBD: Failed to read block at offset %u, ERROR
%s:allocation failed for pl_info, __func__ DEBUG JBD: error %d scanning journal, err ERROR
%s: Unable to allocate buffer, __func__ DEBUG JBD: IO error %d recovering block ERROR
%s:allocation failed for pl_info, __func__ DEBUG ./Logs_kernel.txt:303:KERN_ERR ERROR
%s: Unable to allocate buffer, __func__ DEBUG ./Logs_kernel.txt:304:KERN_ERR ERROR
Atheros HAL assertion failure: %s: line
%u: %s,
DEBUG JBD: recovery pass %d ended at ERROR
ath_hal: logging to %s %s,
ath_hal_logfile,
DEBUG %s: %s:%d: BAD SESSION MAGIC \ ERROR
ath_hal: logging disabled DEBUG %s: %s:%d: BAD TUNNEL MAGIC \ ERROR
%s%s, sep, ath_hal_buildopts[i] DEBUG
msg->msg_namelen wrong, %d, msg-
>msg_namelen
ERROR
failed to allocate rx descriptors: %d,
error
DEBUG addr family wrong: %d, usin->sin_family ERROR
ath_stoprecv: rx queue %p, link %p, DEBUG
udp addr=%x/%hu, usin-
>sin_addr.s_addr, usin->sin_port
ERROR
no mpdu (%s), __func__ DEBUG %s: %s:%d: BAD TUNNEL MAGIC ERROR
Reset rx chain mask. Do internal reset.
(%s), __func__
DEBUG %s: %s:%d: BAD TUNNEL MAGIC ERROR
OS_CANCEL_TIMER failed!! DEBUG socki_lookup: socket file changed! ERROR
%s: unable to allocate channel table,
__func__
DEBUG %s: %s:%d: BAD TUNNEL MAGIC ERROR
%s: unable to collect channel list from
hal;
DEBUG %s: %s:%d: BAD SESSION MAGIC \ ERROR
%s: cannot map channel to mode; freq
%u flags 0x%x,
DEBUG %s: %s:%d: BAD TUNNEL MAGIC \ ERROR
%s: unable to reset channel %u
(%uMhz)
DEBUG
msg->msg_namelen wrong, %d, msg-
>msg_namelen
ERROR
%s: unable to restart recv logic, DEBUG addr family wrong: %d, usin->sin_family ERROR
%s: start DFS WAIT period on channel
%d, __func__,sc->sc_curchan.channel
DEBUG
udp addr=%x/%hu, usin-
>sin_addr.s_addr, usin->sin_port
ERROR
%s: cancel DFS WAIT period on
channel %d, __func__, sc-
>sc_curchan.channel
DEBUG %s: %s:%d: BAD TUNNEL MAGIC ERROR
Non-DFS channel, cancelling previous
DFS wait timer channel %d, sc-
>sc_curchan.channel
DEBUG %s: %s:%d: BAD TUNNEL MAGIC ERROR
%s: unable to reset hardware; hal status
%u
DEBUG socki_lookup: socket file changed! ERROR