D-Link DSR-1000N, User Manual

Page: 12 / 200

Unified Services Router User Manual
10
To configure LAN Connectivity, please follow the steps below:
1.
In the LAN Setup page, enter the following information for your router:
•
IP address (factory default: 192.168.10.1).
If you change the IP address and click Save Settings, the GUI will not respond.
Open a new connection to the new IP address and log in again. Be sure the LAN
host (the machine used to manage the router) has obtained IP address from newly
assigned pool (or has a static IP address in the router’s LAN subnet) before
accessing the router via changed IP address.
•
Subnet mask (factory default: 255.255.255.0).
2.
In the DHCP section, select the DHCP mode:
•
None: the router’s DHCP server is disabled for the LAN
•
DHCP Server. With this option the router assigns an IP address within the specified
range plus additional specified information to any LAN device that requests DHCP
served addresses.
•
DHCP Relay: With this option enabled, DHCP clients on the LAN can receive IP
address leases and corresponding information from a DHCP server on a different
subnet. Specify the Relay Gateway, and when LAN clients make a DHCP request it
will be passed along to the server accessible via the Relay Gateway IP address.
•
If DHCP is being enabled, enter the following DHCP server parameters:
•
Starting and Ending IP Addresses: Enter the first and last continuous
addresses in the IP address pool. Any new DHCP client joining the LAN is
assigned an IP address in this range. The default starting address is
192.168.10.2. The default ending address is 192.168.10.100. These
addresses should be in the same IP address subnet as the router’s LAN IP
address. You may wish to save part of the subnet range for devices with
statically assigned IP addresses in the LAN.
•
Primary and Secondary DNS servers: If configured domain name system
(DNS) servers are available on the LAN enter their IP addresses here.
•
WINS Server (optional): Enter the IP address for the WINS server or, if
present in your network, the Windows NetBios server.
•
Lease Time: Enter the time, in hours, for which IP addresses are leased to
clients.