D-Link DSR-1000N, User Manual

Page: 183 / 200

Unified Services Router User Manual
181
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_dst, family)
DEBUG encrypt data length mismatch DEBUG
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_src, family)
DEBUG encrypt data does not compare DEBUG
a guy asks for address mask. Who is it? DEBUG tkip decap failed DEBUG
icmp v4 hw csum failure) DEBUG decrypt phase1 botch DEBUG
expire>> %u %d %d %d, expire, DEBUG decrypt data does not compare DEBUG
+ %u %d %d %d, expire, DEBUG decap botch; length mismatch DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash, DEBUG decap botch; data does not compare DEBUG
rt_bind_peer(0) @%p,
NET_CALLER(iph)
DEBUG tkip demic failed DEBUG
ip_rt_advice: redirect to DEBUG 802.11i TKIP test vectors passed DEBUG
ip_rt_bug: %u.%u.%u.%u ->
%u.%u.%u.%u, %s,
DEBUG %s, buf DEBUG
UDP: short packet: From
%u.%u.%u.%u:%u %d/%d to
%u.%u.%u.%u:%u,
DEBUG
Atheros HAL assertion failure: %s: line
%u: %s,
DEBUG
UDP: bad checksum. From
%d.%d.%d.%d:%d to %d.%d.%d.%d:%d
ulen %d,
DEBUG
ath_hal: logging to %s %s,
ath_hal_logfile,
DEBUG
a guy asks for address mask. Who is it? DEBUG ath_hal: logging disabled DEBUG
fib_add_ifaddr: bug: prim == NULL DEBUG %s%s, sep, ath_hal_buildopts[i] DEBUG
fib_del_ifaddr: bug: prim == NULL DEBUG
ath_pci: No devices found, driver not
installed.
DEBUG
expire>> %u %d %d %d, expire, DEBUG _fmt, __VA_ARGS__ DEBUG
+ %u %d %d %d, expire, DEBUG
%s: Warning, using only %u entries in
%u key cache,
DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash, DEBUG %s: TX99 support enabled, dev->name DEBUG
rt_bind_peer(0) @%p, DEBUG
%s:grppoll Buf allocation failed
,__func__
DEBUG
ip_rt_advice: redirect to DEBUG %s: %s: unable to start recv logic, DEBUG
ip_rt_bug: %u.%u.%u.%u ->
%u.%u.%u.%u, %s,
DEBUG %s: %s: unable to start recv logic, DEBUG
%s: lookup policy [list] found=%s, DEBUG %s: no skbuff, __func__ DEBUG
%s: called: [output START],
__FUNCTION__
DEBUG
%s: hardware error; resetting, dev-
>name
DEBUG
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl4_dst, family)
DEBUG
%s: rx FIFO overrun; resetting, dev-
>name
DEBUG
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl4_src, family)
DEBUG
%s: unable to reset hardware: '%s'
(HAL status %u)
DEBUG
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_dst, family)
DEBUG
%s: unable to start recv logic, dev-
>name
DEBUG
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_src, family)
DEBUG
%s: %s: unable to reset hardware: '%s'
(HAL status %u),
DEBUG
a guy asks for address mask. Who is it? DEBUG %s: %s: unable to start recv logic, DEBUG
icmp v4 hw csum failure) DEBUG ath_mgtstart: discard, no xmit buf DEBUG
expire>> %u %d %d %d, expire, DEBUG
%s: [%02u] %-7s , tag, ix, ciphers[hk-
>kv_type]
DEBUG
+ %u %d %d %d, expire, DEBUG %02x, hk->kv_val[i] DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash, DEBUG mac %s, ether_sprintf(mac) DEBUG
rt_bind_peer(0) @%p,
NET_CALLER(iph)
DEBUG %s , sc->sc_splitmic ? mic : rxmic DEBUG
ip_rt_advice: redirect to DEBUG %02x, hk->kv_mic[i] DEBUG