D-Link DSR-1000N, User Manual

Page: 156 / 200

Unified Services Router User Manual
154
Created EAP/PEAP context: OK DEBUG
Setting message in fragment buffer:
ERROR
ERROR
Deleted EAP/PEAP context: OK DEBUG
Allocating TLS read buffer is NULL:
ERROR
ERROR
Upper EAP sent us: decision = %d
method state = %d
DEBUG Setting last fragment: ERROR ERROR
P2 decision=(%d); methodState=(%d) DEBUG Getting message: ERROR ERROR
Writing message to BIO: ERROR. DEBUG Processing PEAP message: ERROR ERROR
Encrypted (%d) bytes for P2 DEBUG Setting fragment: ERROR ERROR
P2: sending fragment. DEBUG Creating receive buffer: ERROR ERROR
P2: message size = %d DEBUG Setting first fragment: ERROR ERROR
P2: sending unfragmented message. DEBUG Sending P1 response: ERROR ERROR
P1: Sending fragment. DEBUG
NULL request (or response) PDU or
NULL context: ERROR
ERROR
P1: Total TLS message size = (%d) DEBUG
Expecting start packet, got something
else: ERROR
ERROR
P1: sending unfragmented message. DEBUG Protocol version mismatch: ERROR ERROR
peapFragFirstProcess: TLS record size
to receive = (%d)
DEBUG
Processing PEAP message (from
frag): ERROR
ERROR
Setting version %d DEBUG Processing PEAP message: ERROR ERROR
PEAP pkt rcvd: data len=(%d) flags=(%d)
version=(%d)
DEBUG Processing PEAP message: ERROR ERROR
Got PEAP/Start packet. DEBUG Indicated length not valid: ERROR ERROR
Got first fragment DEBUG
Did not get Acknowledged result:
ERROR
ERROR
Got fragment (n) DEBUG
Cannot understand AVP value:
ERROR
ERROR
Got last fragment DEBUG eapExtResp is NULL: ERROR ERROR
Got unfragmented message DEBUG
eapWscCtxCreate:
EAPAUTH_MALLOC failed.
ERROR
Got frag ack. DEBUG
eapWscProcess: umiIoctl req to WSC
failed, status = %d
ERROR
Ext AVP parsed: flags=(0x%x) DEBUG eapWscCheck: Invalid frame ERROR
Mandatory bit not set: WARNING DEBUG eapWscBuildReq: Invalid state %d ERROR
Ext AVP parsed: type=(%d) DEBUG
eapWscProcessWscResp: Invalid data
recd pData = %p, dataLen"
ERROR
Ext AVP parsed: value=(%d) DEBUG
Data received for invalid context,
dropping it
ERROR
Got PEAPv0 success! DEBUG
eapWscProcessWscResp: Build
Request failed
ERROR
Got PEAPv0 failure! DEBUG
eapWscProcessWscResp: Invalid
state %d
ERROR
pCtx NULL. DEBUG
eapWscProcessWscResp: Message
processing failed 0x%X
ERROR
Authenticator response check: Error DEBUG
eapWscProcessWscData: Invalid
notification recd %d
ERROR
Authenticator response check: Failed DEBUG unable to initialize MD5 ERROR
MS-CHAP2 Response AVP size = %u DEBUG MDString: adpDigestInit for md5 failed ERROR
Created EAP/MS-CHAP2 context: OK. DEBUG EAPAUTH_MALLOC failed. ERROR
pCtx NULL. DEBUG EAPAUTH_MALLOC failed. ERROR
Deleted EAP/MS-CHAPv2 context: OK DEBUG NULL context created: Error ERROR
Not authenticated yet. DEBUG NULL context received: Error ERROR
Authenticator response invalid DEBUG Authenticator ident invalid. ERROR
EAP-MS-CHAPv2 password changed. DEBUG Success request message invalid: ERROR