D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive, Software Manual

Page: 99 / 160

xStack Storage Management Center Software User’s Guide 89
Figure 6-8. Schedule Tab
6.2.5 Saving the Current Configuration (Settings Tab)
Best practices dictate that you save the xStack Storage configuration after you configure the
array for the first time and, thereafter, each time you change the configuration. You can
then use the procedure in section 6.2.6 to restore the configuration if necessary, without
having to re-enter the settings from scratch. Saving the current configuration also allows you
to propagate the configuration to other xStack Storage systems that will use the same
settings.
When you save the current configuration, the following settings are saved in a configuration
file:

Management port IP address

All targets

All the initiators that have access to the targets, including their access rights and CHAP
secrets

All volumes and access parameters

User account information

Battery policy

Advanced system settings (including e-mail, iSNS and SNMP parameters)
To save the current configuration:
1. In the System Administration View, click the Control tab to display the Control dialog in
Figure 6-9.