D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive, Software Manual

Page: 59 / 160

xStack Storage Management Center Software User’s Guide 49
Figure 4-18. Grant Access Screen
8. By default, all iSCSI initiators will have access to the volume you create. If you prefer,
you can grant access to one or more iSCSI initiators listed in the screen, grant access to
an initiator not in the list, or not grant access to an initiator at this time. If you decide
to select multiple iSCSI initiators from the list, you can use the following shortcuts:
–
For adjacent iSCSI initiators, click the first one, then hold down the Shift key and
click the last one. The first and last initiators, and all the initiators between them,
get selected.
–
For non-adjacent initiators, click the first one, then hold down the Ctrl key and click
each subsequent initiator.
– To deselect an initiator, hold down the Ctrl key and click an initiator that is
selected.
9. Click Next.
The Ready to Create Volume screen appears (see Figure 4-19).
If you decide not to grant access to an initiator now, you can do so at a later
time (see section 4.3).