D-Link DSL-G684T User Manual Download Page 53

Page: 53 / 121

DSL-G684T Wireless ADSL Router User Guide

Static IP Parameters

Description

Connection Type

This specifies the connection type and the encapsulation method used for
your Static IP Address connection. The options available are

Bridged IP LLC,

Bridged IP VC-Mux, Routed IP LLC, Routed IP VC-Mux or IPoA.

IP Address

This is the permanent global IP address for your account. This is the

address that is visible outside your private network. Get this from your ISP.

Subnet Mask

This is the Subnet mask for the WAN interface. Get this from your ISP.

Gateway Address

This is the IP address of your ISP’s Gateway router. It provides the
connection to the Router for IP routed traffic that is outside your ISP’s

network. That is, this will be the primary connection from the Router to

most of the Internet. Get this IP address from your ISP.

ARP Server Address

(IPoA connection only)

This is not required for all IPoA connections. Check with your ISP for an

ARP server IP address if this is necessary for your IPoA connection.

Primary DNS Address

This is the IP address of the first choice for Domain Name Service (DNS)
used to match the named URL web address used by most browsers with

the actual global IP address used for a web server. Usually this will be a

server owned by the ISP. Get this IP address from your ISP.

Secondary DNS Address

This is the second choice for a DNS server. Get this IP address from your

ISP.

MTU

The Maximum Transmission Unit size may be changed if you want to
optimize efficiency for uploading data through the WAN interface. The

default setting (

1400 bytes) should be suitable for most users. Some user

may want to adjust the setting to optimize performance for wireless traffic

or when low latency is desired (such as with Internet gaming). It is highly

recommended that the user research how adjusting the MTU may affect

network traffic for better or worse.

NAT

Network Address Translation may be enabled or disabled with the pull-

down menu. Keep in mind that disabling NAT allows on a single computer

to be used for Internet access through the Router. NAT is enabled and

disabled for the Router on all connections (i.e. Pvc0 – Pvc7) if your Router

is set up for multiple virtual connections.

Firewall

Use this to universally enable or disable the Firewall and Filter features
available in the Router. If you disable this you will not be able to configure

settings in the

Firewall Configuration

window or the

Filters

window in

the

Advanced

directory.

Summary of Contents for DSL-G684T


























































































































Search results

Summary of Contents for DSL-G684T

Reviews:

Related manuals for DSL-G684T

Brands by name

Popular brands

D-Link DSL-G684T, User Manual

Search results

Summary of Contents for DSL-G684T

Reviews:

Related manuals for DSL-G684T

Brands by name

Popular brands