D-Link DSL-G684T User Manual Download Page 16

Page: 16 / 121

DSL-G684T Wireless ADSL Router User Guide

Front Panel Display

Place the Router in a location that permits an easy view of the LED indicators on the front panel.

The LED indicators on the front panel include

Power

Status

ADSL

WLAN

, and

LAN

. The

ADSL

WLAN

, and

LAN

indicators monitor link status and activity (

Link/Act

Power

Steady green light indicates the unit is powered on. When the device is

powered off this remains dark.

Status

Lights steady green during power on self-test (POST). Once the connection

status has been settled, the light will blink green. If the indicator lights

steady green after the POST, the system has failed and the device should be
rebooted.

ADSL (Link/Act)

Steady green light indicates a valid ADSL connection. This will light after the

ADSL negotiation process has been settled. A blinking green light indicates
activity on the WAN (ADSL) interface.

WLAN (Link/Act)

Steady green light indicates a wireless connection. A blinking green light
indicates activity on the WLAN interface

LAN (Link/Act)

A solid green light indicates a valid link on startup. These lights blink when

there is activity currently passing through the Ethernet port.

Summary of Contents for DSL-G684T


























































































































Search results

Summary of Contents for DSL-G684T

Reviews:

Related manuals for DSL-G684T

Brands by name

Popular brands

D-Link DSL-G684T, User Manual

Search results

Summary of Contents for DSL-G684T

Reviews:

Related manuals for DSL-G684T

Brands by name

Popular brands