D-Link DSL-G684T User Manual Download Page 59 | Manualshive

Page: 59 / 121

background image

DSL-G684T Wireless ADSL Router User Guide

To display the

DHCP Settings

window, click the

DHCP

button in the

Home

directory. Any active DHCP Clients

appear at the bottom of the window in the DHCP Clients List. The IP address and MAC address for active DHCP
clients are displayed in the list.

The two options for DHCP service are as follows:

You may use the Router as a DHCP server for your LAN.

You can disable DHCP service and manually configure IP settings for workstations.

You may also configure DNS settings for the LAN when using the Router in DHCP mode. In Auto

DNS Mode,

the

Router will automatically relay DNS settings to properly configured DHCP clients. To manually enter DNS IP
addresses, select the

Manual

DNS Mode option and type in a

Primary

and

Secondary DNS

IP Address in the field

provided. The manually configured DNS settings will be supplied to clients that are configured to request them from the
Router.

Follow the instructions below according to which of the above DHCP options you want to use. When you have
configured the DHCP Settings as you want them, click the

Apply

button to commit the new settings.

Use the Router for DHCP

To use the built-in DHCP server, click to select the

DHCP Server

option if it is not already selected. The IP Address

Pool settings can be adjusted. The

Starting IP Address

is the lowest available IP address (default = 192.168.1.2). If

you change the IP address of the Router this will change automatically to be 1 more that the IP address of the Router.
The

Ending IP Address

is the highest IP address number in the pool. Type in the

Lease Time

in the entry field

provided. This is the amount of time in seconds that a workstation is allowed to reserve an IP address in the pool if the
workstation is disconnected from the network or powered off.

Disable the DHCP Server

To disable DHCP, click to select the

No DHCP

option and click on the

Apply

button. Choosing this option requires

that workstations on the local network must be configured manually or use another DHCP server to obtain IP settings.
If you configure IP settings manually, make sure to use IP addresses in the subnet of the Router. You will need to use
the Router’s IP address as the Default Gateway for the workstation in order to provide Internet access.

DHCP Settings window with DHCP disabled

47

«
...
57
58
59
60
61
...
»

Summary of Contents for DSL-G684T


























































































































Reviews:

No comments

Related manuals for DSL-G684T

Brand: Zhone Pages: 7

Brand: Zhone Pages: 1

Brand: Paradyne Pages: 45

Brand: Kontron Pages: 42

Brand: Maipu Pages: 80

Brand: QNAP Pages: 54

System Storage DS3200

Brand: IBM Pages: 2

COMMWARE ECHO 5G

Brand: pivotal Pages: 2

Brand: NKE Pages: 15

2000 IDU Series

Brand: EMS Pages: 52

Ultrastar Serv24 S2122-N24-4

Brand: HGST Pages: 36

Brand: Buffalo Pages: 2

Brand: Icy Box Pages: 2

Brand: LevelOne Pages: 11

Brand: iNetVu Pages: 20

Brand: SMC Networks Pages: 56

Brand: M-system Pages: 4

Brand: Kramer Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands