D-Link DSL-G624T User Manual Download Page 67 | Manualshive

Page: 67 / 118

background image

DSL-G624T Wireless ADSL Router User Guide

Filters

Filter rules in the Router are put in place to allow or block specified traffic. The Filter Rules however can be
used in a single direction to examine and then Allow or Deny traffic for Inbound (WAN to LAN) or
Outbound (LAN to WAN) routed data. The rules are based on IP address and TCP/UDP port.

Configure the filter rules as desired and click the

Apply

button to create the rule. The newly created rule

appears listed in the Outbound Filter List at the bottom of the window. The table below describes the various
parameters that are configured for the filter rules.

Filters menu

To modify any previously created filter rule, click on the note pad icon in the right hand column of the Filter
List for the set you want to configure. Adjust the settings as desired and click the

Apply

button to put the

new settings into effect.

First determine the direction of the traffic you want the rule to filter. To filter WAN to LAN traffic, select the

Inbound Filter

option. Any new Inbound Filter rules created will appear in the list. Likewise, should you to

filter LAN to WAN traffic, create an

Outbound Filter

rule.

Note

The Service Filtering feature of the Firewall may interfere with ules configured in the
Filters window. For example, FTP packets are not allowed through from the external
network by default. See the Firewall section below for details.

59

«
...
65
66
67
68
69
...
»

Summary of Contents for DSL-G624T























































































































Reviews:

No comments

Related manuals for DSL-G624T

3CR860-95 - OfficeConnect Secure Router

Brand: 3Com Pages: 2

Brand: 3Com Pages: 26

Brand: Observint Pages: 117

Brand: TP-Link Pages: 110

Brand: Schrack Technik Pages: 2

Brand: Comelit Pages: 19

3C8567 - SuperStack II NETBuilder SI 567...

Brand: 3Com Pages: 6

Brand: Aaeon Pages: 57

Brand: Juniper Pages: 196

Brand: Alcatel-Lucent Pages: 60

Brand: Handicare Pages: 60

Brand: Zalip Pages: 76

Brand: ActiveEye Pages: 35

Brand: Tripp Lite Pages: 3

Brand: Proxim Pages: 65

Brand: LevelOne Pages: 61

Brand: National Instruments Pages: 4

Smart One WAC52G

Brand: Waver Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands