D-Link DSL-G624T User Manual Download Page 50

Page: 50 / 118

DSL-G624T Wireless ADSL Router User Guide

ATM VC Settings

ATM VC settings can be configured for all connection types in the WAN configuration menu of the Home
directory.

ATM VC Settings in WAN Settings menu

The table below describes the ATM VC settings used to configure a connection for an ADSL account.

ATM VC Parameters

Description

PVC

The Router supports using up to eight multiple virtual connections. This
window allows the user to configure WAN settings for all the available

connections (see instructions below on how to set up Multiple Virtual

Connections). Use the PVC drop-down menu to select the connection

(Pvc0 to Pvc7) you want to configure. Since most users will use only a
single connection, the default setting

Pvc0

can be used for any changes

made to the WAN settings.

VPI

The Virtual Path Identifier is used with the VCI to define a dedicated

circuit on the ATM network portion of the connection to the Internet and
WAN. Most users will not need to change this setting.

VCI

The Virtual Channel Identifier is used with the VPI to define a dedicated

circuit on the ATM network portion of the connection to the Internet and

WAN. Most users will not need to change this setting.

Virtual Circuit

As with the PVC setting, this is mainly for use by clients who are

configuring the Router for multiple virtual connections. Use this to enable

or disable the PVC you are currently configuring. By default, the Pvc0 is

Enabled

and the remaining PVCs are disabled.

Summary of Contents for DSL-G624T























































































































Search results

Summary of Contents for DSL-G624T

Reviews:

Related manuals for DSL-G624T

Brands by name

Popular brands

D-Link DSL-G624T, User Manual

Search results

Summary of Contents for DSL-G624T

Reviews:

Related manuals for DSL-G624T

Brands by name

Popular brands