background image

Section 3 – Configuration 
 

 

D-Link DSL-2542B User Manual 

 

   

 

 

 

 

 

 

 

 

 

            

40 

Firewall & DMZ 

 
To access the 

Firewall & DMZ

 window, click the 

Firewall & DMZ 

button in the 

Advanced

 directory.

 

Firewalls may conflict with certain interactive applications such as video 
conferencing or playing Internet video games. For these applications, a 
firewall bypass can be set up using a DMZ IP address. The DMZ IP 
address is a “visible” address and does not benefit from the full protection 
of the firewall function. Therefore it is advisable that other security 
precautions be enabled to protect the other computers and devices on the 
LAN. It may be wise to use isolate the device with the DMZ IP address 
from the rest of the LAN. 
If you want to use video conferencing, for example, and still use a firewall, 
you can use the DMZ IP address function. In this case, you must have a 
PC or server through which video conferencing will take place. The IP 
address of this PC or server will then be the DMZ IP address. You can 
designate the server’s IP address as the DMZ by going to the DMZ 
Settings section and typing in the IP address in the IP Address

 

field 

provided and then enabling its status by ticking the

 

Enable DMZ 

checkbox, clicking 

Apply Settings

,

 

and then clicking the 

Reboot

 button 

on the left panel to let your changes take effect. 
For the system that uses the DMZ IP address, you may want to manually 
assign an IP address to it and adjust your DHCP server addresses so that 
the DMZ IP address is not included in the DHCP server range. This way 
you avoid possible IP address problems if you reboot the DMZ system. 
The Firewall Settings

 

section allows the Router to enforce specific 

predefined policies intended to protect against certain common types of 
attacks. Stateful Packet Inspection (SPI) is a packet inspection process 
that blocks unwanted and unrequested packets trying to reach PCs on 
your LAN. A DoS "denial-of-service" attack is characterized by an explicit 
attempt by attackers to prevent legitimate users of a service from using   

 

Summary of Contents for DSL-2542B




























































Reviews: